Poly Rings, Sleeves and Links

Download PDF
  • Glasfloss Phoenix Series Poly-Rings, Sleeves and Links offer a variety of styles, multiple filtration media layers and performance levels for most applications.

    From an air entering filter for paint booths to upgrading a lower efficient filter installation, the Poly-Ring Panel Filter is perfect for many filtration applications. The Glasfloss Phoenix Series Poly-Rings are offered in 1/2″: PR-5; 1″: PR-10 and 2″: PR-20 nominal thickness for a broad range of dust loading applications.

  • Glasfloss Phoenix Series Poly-Rings, Sleeves and Links shall be constructed utilizing layers of 100% non-woven polyester media.┬á For optimum performance, the air leaving side of the Phoenix Series products shall be treated with a non-toxic, non-migratory adhesive.┬á An internal wire frame shall be thermally sealed within the filter to maintain integrity.┬á A thermal seal shall extend around the perimeter edge of the internal wire frame and on both sides of the center┬á wire support strut, ensuring the permanent bond of all media plies. There shall be sufficient media overlap to ensure a positive seal between the filter and the holding frame, eliminating the possibility of air bypass and the need for supplemental gasketing.┬á PR-10 and PR-20 Poly-Rings shall be rated MERV 8 when tested in accordance with the ANSI/ASHRAE 52.2 Test Standard.